How to make your wall stronger
- Wall lay out, fix wall dowel bar diameter 6 mm. steel in column or floor. Make sure that column are fixed, cannot move.
- Cleaning, floor, column, TAF blocks and moisten on floor column and block.
- Use string for control line, plump and level of wall work.
- Use coarse sand mortar, ratio of cement : coarse sand, 1 : 3 to 1 : 6 + mortar plasticizer for block masonry.
- Leave mortar settlement and curing with eater around 7 days.
- Mark level of wall plaster, clean and moisten well before plaster.
- Standard thickness of wall plaster around 1 to 1.5 cm. should be device plastering in two layers.
- First layers of plastering with coarse sand mortar, ratio of cement : coarse sand 1:3 to 1 : 6 + mortar plasticizer, leave mortar settlement around 3 days or more.
- Moisten first layer and finish second layer plastering with fine sand mortar, ratio of cement : fine sand, 1:3 to 1 “ 6 +mortar plasticizer.
- Use lintel at open wall or every 8 sq.m. of wall area.
- Use wire mesh (chicken wire) at column and/or wall joint.
- Use river clean and fresh water only.
- Don’t plaster in direct sun because wall loose water very fast that make it crack.
- Don’t use dirt sand sometime mortar cannot use and loose more cement.
The Comparison Table
Wall fabricated comparison table (Click Here)
Properties Comparison Between CLC (C-Lite) & ACC (Click Here)
